Your safety is our whyFire Department Services
Fire Department Ladder Inspections in Ontario
Ontario Regulation 714/94 is the governing standard for the inspection and certification of all fire department chassis mounted devices. These inspections are to conform to NFPA 1911 (which replaces NFPA 1914) for aerial ladders, platforms, and water towers.
We service many different fire departments in the Niagara Region and Greater Hamilton Area with our fire department inspections, including ladder and fire truck aerial inspections in Toronto.
Talk To An Expert
Don’t see exactly what you are looking for? Or maybe you do and want more specifics or an estimate. Either way, you can call us at
470-552-8301
right now or just fill out the form below and we will respond back within 24 hours.
Fire Truck Ground Ladder Inspection
Aerial Trucks
Ontario Regulation 714/94 requires the inspection and certification of all fire department chassis-mounted devices on an annual basis. This inspection is to be done visually by a competent person and using nondestructive testing methods should the visual inspection indicate a potential hazard. A complete nondestructive test is required every five years. These inspections are to conform to NFPA 1911 (which replaces NFPA 1914) for aerial ladders, platforms, and water towers.
Ground Ladders
Ground ladders are also to be inspected on an annual basis to ensure their serviceability. Inspections are to be carried out on extension ladders, roof ladders, and folding ladders under the requirements of NFPA 1932.
Our Service
In contrast to some other companies, we perform all tests required in the standard, including:
- Horizontal bend test (500 lb test load)
- Roof hook test (1000 lb test load)
- Extension ladder hardware test (1000 lb test load)
- Visual inspection of all elements
- Heat sensor check and replacement (if necessary)
- Liquid penetrant inspection of rung welds (IIA exclusive, optional test)
Our staff of professional engineers and certified inspectors has years of experience with the inspection and certification of fire department aerial devices.
We are prepared to travel anywhere at any time to evaluate the serviceability of fire-fighting equipment after any incident that may have damaged the structure.
Our Service
In contrast to some other companies, we perform all tests required in the standard, including:
- Horizontal bend test (500 lb test load)
- Roof hook test (1000 lb test load)
- Extension ladder hardware test (1000 lb test load)
- Visual inspection of all elements
- Heat sensor check and replacement (if necessary)
- Liquid penetrant inspection of rung welds (IIA exclusive, optional test)
Our staff of professional engineers and certified inspectors has years of experience with the inspection and certification of fire department aerial devices.
We are prepared to travel anywhere at any time to evaluate the serviceability of fire-fighting equipment after any incident that may have damaged the structure.
